Side peg chipped off

by Corrine
(CT)




My starter peg chipped right off my favorite green loom. It's a pain to use it without it, but I don't like the "line" ya get when using one of the loom pegs. Any ideas? I thought about just using a piece of tape. Hmmmm.




Comments for
Side peg chipped off

Average Rating starstarstarstarstar

Click here to add your own comments

Aug 16, 2011
Rating
starstarstarstarstar 		Push Pin Fix
by: Anonymous

I broke my starting peg off a long time ago...for a replacement, I used a push pin/thumb tack (the type with the tall head on it). I used a hammer to carefully pound it into place. After it was in, I pulled it out, put a squirt of super glue on the metal part of the push pin, and put it back into the hole. This has been holding up for over 2 years.
May 19, 2011
Rating
starstarstarstarstar 		Side peg chipped off
by: Stephanie

Visit your local hardware store and purchase some Epoxy Putty. NOT the liquid epoxy! You'll be able to easily fill in the chip, and if it's not as smooth as you'd like, sand it with fine grit sandpaper.

Click here to add your own comments

Join in and write your own page! It's easy to do. How?
Simply click here to return to Knitting Loom Forum

Back to Home Page